Packard 110-120 Parts

GROUP
2.001 ---- Bumper bar front or rear, 1937-41 Used, Except Clipper $485.00
2.001---- Bumper bar front or rear, 1942-47 Clipper INQUIRE
2.001---- Bumper bar front or rear, 1942-47 Clipper, Used $267.00
2.001---- Bumper bolt stainless oval head, 1937-39 $36.00
2.001---- Bumper bolt stainless rectangular head, 1937-39 $36.00
2.001---- Bumper bolt, red hex head $59.00
2.002---- Bumper grommets, 1935-42, Except Clipper, pair. Specify front or rear $75.00
2.0050---- Bumper guard, front or rear, 1937-40, used $125.00
2.0050---- Bumper guard, front or rear, 1941-47 Clipper $99.00
2.0055---- Front fender outer bumper guard, 1946-47, left or right $289.00
2.0056---- Rear fender outer bumper guard, 1946-47, left or right $289.00
2.012---- Bumper support bracket, front, left or right, used $98.00
2.013---- Bumper support bracket, rear, left or right, used (inquire if equipped with trunk rack) $98.00

Order Form
Top of Page
View Packard 110-120 Parts Index

CLUTCH and TRANSMISSION ---- Group 3 ----

Please inquire for any Clutch and Transmission parts not listed below
View Packard 110-120 Parts Index

GROUP
3.000 Clutch Assembly
3.000---- Clutch pressure plate, Exchange (or add deposit of $100)$194.00 - See Note #1
3.005---- Clutch disc, Exchange (or add deposit of $100) $184.00 - See Note #1

GROUP
3.100 ---- Clutch Control
3.101---- Clutch pedal booster spring, 1941-47 Clipper $51.00
3.112---- Clutch and brake pedal boot, pair $50.00
3.115---- Clutch pedal retracting spring, most models $44.00
3.115---- Clutch pedal linkage, springs etc. INQUIRE
3.1166---- Clutch and brake pedal pad, each $22.00
3.118---- Clutch throwout bearing lever $120.00
3.127---- Throwout bearing lever relay rod INQUIRE
3.148---- Throwout bearing, less collar, 1935-36 $75.00
3.148---- Throwout bearing, with collar, 1935-36 Exchange or add $75 deposit $170.00
3.148---- Throwout bearing and Collar assembly, 1937-47, exchange or add $105.00 deposit $170.00
3.149---- Throwout bearing return spring $15.00

GROUP
3.1492---- Clutch control Electromatic
3.1492---- Clutch control Electromatic 1941-47 Models
3.14931---- Electromatic clutch diaphragm $120.00
3.14955---- Electromatic vacuum cylinder cable $104.00
3.1499---- Electromatic control valve repair kit $125.00
3.150---- Electromatic clutch assemblies, parts, etc. INQUIRE
3.152---- Electromatic clutch control valve air cleaner $80.00

GROUP
3.200---- Transmission
3.200---- Transmission, rebuilt and used assembly. INQUIRE - See Note #2
3.205---- Transmission case floor shift Boot, 1935-39
Note: most 1939 models are column shift, see 3.311 $69.00
3.209---- Input shaft $213.00
3.2091---- Front bearing $53.00
3.2092---- Input shaft pilot bearing $23.00
3.214---- Countershaft $213.00
3.215---- Cluster gear 1935-38 $349.00
3.215---- Cluster gear 1939-47 $299.00
3.2155---- Cluster gear needle bearing set $32.00
3.218---- Cluster gear end plate (hardened washer 2 used per car) $52.00
3.219---- Cluster gear thrust washer (2 used per car) $50.00
3.221---- Synchronizer housing, 1935-38 $474.00
3.222---- Direct drive and second speed clutch gear (Synchro hub) 1939-47 $147.00
3.223---- Direct drive and second speed clutch ring, 1935-38 $202.00
3.223---- Direct drive and second speed clutch ring, 1939-47, Used only. $278.00
3.2281---- Rear bearing, without overdrive $51.00
3.2281---- Rear bearing, kit with overdrive $98.00
3.2282---- Driving shaft front bearing (caged bearing mounted in input shaft) $68.00
3.232---- Rear seal $27.00
3.234---- Low and reverse gear, 1939-47 $177.00
3.235---- Mainshaft 1935-38, Exchange or add $150 deposit
$698.00 - See Note #1
3.235---- Mainshaft w/o overdrive, 1939-47, Exchange or add $150 deposit
$747.00 - See Note #1
3.235(3.403)---- Mainshaft with overdrive, 1939-47 INQUIRE
3.236---- Universal joint flange $136.00
3.245---- Gasket set, standard without OD $37.00
3.246---- Reverse idler gear $120.00

GROUP
3.260---- Synchronizer
3.2635---- Synchronizer repair kit, 1935-38, 6 balls, 6 springs $38.00
3.2635---- Synchronizer repair kit, 1939-47, 3 balls, 3 springs, 3 detents $49.00

GROUP
3.270---- Overdrive
Please inquire for any overdrive parts not listed below
3.2735---- Gasket set, standard with overdrive $46.00
3.282 (3.435)---- Free wheel cam $190.00
3.283---- Free wheeling cam and roller retainer assembly, R9 1940-47 $213.00
3.284---- Free wheel roller set $72.00
3.288---- Governor assembly, 1940-47 Exchange, or add $100.00 deposit
$378.00 - See Note #1
3.2990---- Overdrive knob, 1941-47, Reproduction INQUIRE
3.292---- Governor switch and cover assembly $190.00

GROUP
3.294---- Overdrive mainshaft
3.294---- Main shaft assembly $355.00
3.295---- Rear overdrive bearing kit, $90.00
3.297---- Rear seal $25.00
3.2971 (3.446)---- Pinion and cage assembly $355.00
3.2975 (3.464)---- Ring gear $123.00
3.2986 (3.482)---- Stationary gear assembly $233.00
3.2989 (3.404)---- Lockout cable assembly (Overdrive cable) INQUIRE
3.2995---- Overdrive rear mount, Exchange only
$98.00 - See Note #1

GROUP
3.300---- Gearshift
3.300---- Idler lever to trans rod, 1939-47 $69.00
3.311---- Shift lever boot, 1939 black $28.00
3.311---- Shift lever boot, 1939 brown $39.00
3.311---- Shift lever boot, 1940-47 black $19.00
3.311---- Shift lever boot, 1940-47 brown $27.00
3.314 (3.340)---- Gearshift lever knob, 1935-38 $43.00
3.314---- Gearshift lever knob, 1939-40, must state thread diameter. 1941-47 Clipper $45.00
3.314---- Gearshift lever knob, 1941 110 & 120 $69.00
3.325---- Gearshift shaft and housing, 1939-47 INQUIRE
3.346---- Direct and 2nd shaft lever, 1939-47 $72.00
3.346---- 1st and reverse shaft lever, 1939-47 $72.00

GROUP
Transmission mount
(5.16005)---- Transmission mount, 1935-37, pair , Exchange only (2 per car) $250.00 - See Note #1
(5.16005)---- Transmission mount, 1938-47, each (2 per car) $70.00

GROUP
3.999---- Transmission rebuilding kits
3.999---- Transmission rebuilding kit w/o overdrive. Includes gaskets, bearings, seal, sync. kit $155.00
3.999---- Transmission rebuilding kit with overdrive $270.00

Order Form
Top of Page
View Packard 110-120 Parts Index

Please Specify Delco or Autolite System

Please inquire for any Electrical parts not listed below

GROUP
4.000---- Battery
4.0001---- Battery cable, ground (flat woven wire type) $29.00
4.0003---- Battery cable clamp boot $14.00
4.0003---- Battery to starter cable $49.00
4.0004---- Battery cable at solenoid terminal boot $14.00
4.0005---- Battery carrier (support) 1935-42 reproduction except Clipper (Clipper INQUIRE) $70.00
4.00073---- Battery retainer 1941-47 Clipper, hold down $53.00
4.0008---- Battery support, 1941-47 good used (new Inquire) $180.00

GROUP
4.0101---- Cigar lighter
4.0101---- Cigar lighter base, most models $53.00
4.0104---- Cigar lighter chrome knob, replacement, 1935-39 $49.00
4.0104---- Cigar lighter generic chrome knob $20.00
4.01041---- Cigar lighter knob 1941-47 Clipper $49.00
4.0105---- Cigar lighter element $35.00
4.0200---- Clock
Most clocks available INQUIRE

GROUP
4.03001---- Distributor
specify Autolite or Delco and tag number
4.03001 ---- Distributor with Petronix conversion 1937-47 Six cylinder exchange or add $115 deposit $335.00
4.03001 ---- Distributor with Petronix conversion 1937-47 Eight cylinder exchange or add $115 deposit $329.00
4.03001---- Distributor, rebuilt, (Exchange or add deposit of $115.00) $219.00 - See Note #1
Access.---- Tune-up kit: contains points, condenser, cap, rotor, 1935-36 120
Specify 10MM or 14MM plugs add deposit of $50 for point set $129.00
Access. ---- Tune-up kit: contains points, condenser, cap, rotor, 1937-47 8 cyl
with 10MM plugs $78.00
Access---- Tune up kit: contains points, condenser, cap, rotor, 1937-47 6 cyl
with 10MM plugs $65.00
4.0305---- Points and condenser, 1935-36 120 dual point set add deposit of $50 for stationary plate, $82.00
4.0305---- Points and condenser, 1937-47 (1940-47 120 is a replacement set) $25.00
4.0317---- Breaker plate (with points and condenser) most models available $136.00
4.0317---- Cap and rotor $49.00
4.0317---- Vacuum advance Autolite 1937-47, Exchange only $145.00 - See Note #1
4.0317---- Vacuum advance Delco, (6 cyl) Exchange or add $85 deposit $125.00 - See Note #1
4.0404---- Distributor bushing set (2 bushings) $24.00

GROUP
4.0540---- Electromatic clutch control
Many parts available INQUIRE

GROUP
4.0600---- Gauges
4.0600---- Gas tank sending unit rebuilt, Exchange only $235.00 - See Note #1
4.0614---- Gauges, ammeter, gas, oil (1935-40 oil gauge see 10.066), 1935-41 Six
cyl., 120. Most gauges available $175.00
4.0614---- Gauges, ammeter, gas, oil, 1941-47 Clipper only $125.00
4.0622---- Oil gauge sending unit, 1941-47 Clipper only $65.00

GROUP
4.07001---- Generator
specify Autolite or Delco and tag number
4.07001---- Generator, Autolite NEW, 1941-47 Clipper, Exchange or add $130 deposit $419.00 - See Note #1
4.07001---- Generator, rebuilt Exchange or add $15 deposit $235.00 - See Note #1
4.07021---- Generator brush set $26.00
4.07021---- Generator rebuild kit (brush set, bearing and bushing for most models) $48.00
4.07021---- Generator radio noise suppressor $27.00
4.0703---- Voltage regulator, 1935-39 120 and Six, Autolite, Exchange or add $82.00
deposit $190.00 - See Note #1
4.0703---- Voltage regulator, 1937-39 Six , Delco NOS, Exchange or add $82.00
$322.00 - See Note #1
4.0703---- Voltage regulator, 1937-39 Six, Delco replacement, Note: This replacement
requires some modification to wiring and mounting, inquire for details $105.00
4.0703---- Voltage regulator, 1940-47 replacement specify Delco or Autolite
(NOS where available, $160.00) $105.00

GROUP
4.1001---- Horn
4.1001---- Horn assembly used, good working condition, 1935-41 Except Clipper INQUIRE
4.1001---- Horn assembly used, good working condition, 1941-47 Clipper $205.00
4.1016---- Horn relay $35.00
4.1022---- Horn ring 1941-47 Clipper, (good used $95.00) $190.00
4.1031---- Horn button emblem 1941-47 reproduction INQUIRE

GROUP
4.1100---- Ignition cables
4.1100---- Ignition cable set, black cloth covered lacquered set. 8 cylinder $89.00
4.1100---- Ignition cable set, black cloth covered lacquered set, 6 cylinder $82.00
4.1105---- Spark plug 14 MM, 1935-36 120, Note many 1935-36 have later head with 10mm spark plug each $4.00
4.1105---- Spark plug 10 MM, 1937-47 all, each $5.00
4.1109---- Firewall instrument board cables rubber grommet, 1938-40, 1941 110 $17.00

GROUP
4.1203---- Ignition coil and switch
4.1203---- Coil and bracket, Autolite, Exchange or add $50.00 deposit
$299.00 - See Note #1
4.1203---- Coil and bracket, Delco, Exchange or add $50.00 deposit
$299.00 - See Note #1
4.1205---- Ignition switch and cable INQUIRE
4.1206---- Ignition switch lock cylinder INQUIRE
4.1207---- Ignition switch key blank $9.00

GROUP
4.1250---- Backup light
Note: Backup lights were an Accessory for 1935-47
4.1250---- Backup light, 1935-40, with bumper bar mounting bracket,
with PACKARD script INQUIRE
4.1262---- Backup light lens, for above backup lights, each $65.00

GROUP
4.1300---- Headlight assembly
4.1300---- Headlight assemblies, buckets etc. INQUIRE
4.1301---- Headlight bucket mounting gasket, 1941-42 Except Clipper, pair $65.00
4.1301---- Headlight bucket mounting gasket, 1941-47 Clipper, pair $45.00
4.1302---- Headlight mount to fender rubber gasket, 1935-37, pair $74.00
4.13025---- Headlight bulb, 1935-39, each $22.00
4.13025---- Headlight sealed beam, 6 volt $35.00
4.13025---- Headlight parking light bulb, 1935-39 $6.00
4.1303---- Headlight bulb socket, 1935-39, pair $65.00
4.1303---- Headlight bulb retainer, 1940-47 $38.00
4.1311---- Headlight chrome bezel, 1935-37, each, used INQUIRE
4.1311---- Headlight plain bezel, primed, 1940, each $57.00
4.1311---- Headlight chrome bezel, 1941-47 Clipper $79.00
4.1312---- Headlight bezel rubber gasket, 1940-42 Except Clipper, pair $76.00
4.1313---- Headlight lens, 1935-39, each. Specify left or right $125.00
4.1328---- Headlight dimmer switch $40.00
4.1329---- Headlight dimmer switch rubber cap $7.00
4.1335---- Headlight switch, rebuilt, 1935-41 Except Clipper, Exchange only $295.00 - See Note #1
4.1335---- Headlight switch, 1941-47 Clipper, Exchange or add $125.00 deposit $195.00 - See Note #1
NEW---- Dash knobs 1940, reproduction, each INQUIRE
NEW---- Dash knobs 1941 5 piece set, (Throttle, lighter, lights, starter and instrument) INQUIRE

GROUP
4.1400---- Parking light
4.1400---- Parking light assembly, parts 1940-47 INQUIRE
4.14015---- Parking light bulb, 1941-47 Clipper $6.00
4.14028---- Parking light bezel, 1941 Clipper $75.00
4.14028---- Parking light bezel, 1942-47 Clipper $75.00
4.1406---- Parking light to fender mounting gasket, 1940, pair $39.00
4.1406---- Parking light to fender mounting gasket, 1941-42, Except Clipper, pair $100.00
4.1406---- Parking light lens, 1941-42, Except Clipper New plastic reproduction each $125.00
4.1407---- Parking light lens, 1941 Clipper $58.00
4.1407---- Parking light lens, 1942-47 Clipper New plastic reproduction INQUIRE

GROUP
4.1600---- Tail light
4.1600---- Tail light assemblies, INQUIRE
4.1601---- Tail light to body gasket, 1935-37,all except 4 door tournig and conv sedan, pair $69.00
4.1601---- Tail light to body gasket, 1938-42 Except Clipper, pair $59.00
4.1601---- Tail light to body gasket, 1942 Convertible, pair $74.00
4.1601---- Tail light to body mounting gasket, 1941-47 Clipper with steel stamped taillight door, pair $98.00
4.1601---- Tail light to body mounting gasket, 1946-47 Clipper with die cast tail light door, pair $118.00
4.1602---- Tail light shell, 1935-37, with license light lense cut out, each $96.00 without license light lense cut out, each INQUIRE
4.1603---- Tail light to body stanchion, 1935-37, left or right, 4 door Touring Sedan and Convertible Sedan, each $102.00
4.1620---- Tail light chrome bezel, 1935-37, each $64.00
4.1620---- Tail light chrome bezel, 1941, Except Clipper, used only $106.00
4.1620---- Tail light chrome bezel 1941-47 Clipper, (advise plain or ribbed, and casting number) $85.00
4.1622---- Tail light lense, 1935-37, each $75.00
4.1622---- Tail light lense 1938-40, each, advise with or without red jewel in housing $104.00
4.1622---- Tail light lense, 1941 120 and 6 cylinder New plastic reproduction $110.00
4.1622---- Tail light lens, 1942 convertible upper or lower, New plastic reproduction each 110.00
4.1622---- Tail light lense, 1941-47 Clipper (advise plain or ribbed, and casting number) $47.00
4.1623---- Tail light lense gasket, 1935-37, pair (gasket doubles as the lense to bezel retainer) $31.00
4.1623---- Tail light lense gasket 1941-47 Clipper INQUIRE
4.1632---- License plate “T” bracket, 1935-38, for models without center license light $105.00
4.1634---- License light lense, 1935-38, for models with lens on left taillight New plastic reproduction $51.00
(30.650)---- License light lense, 1938-40 center "Packard" New plastic reproduction $83.00
(30.650)---- License light lense, 1941-47 Clipper rectangular, New plastic reproduction INQUIRE
4.1646---- Stoplight switch $34.00

GROUP
4.1800---- Starter
specify Autolite or Delco and tag number
4.1800---- Starter rebuilt, Exchange or add $130 deposit (Some models exchange only) $235.00 - See Note #1
4.18004---- Bendix drive, Exchange or add $75 deposit - See Note #1 $115.00
4.18004---- Brush set $26.00
4.18004---- Rebuild kit, contains: brush set and 2 bushings (where applicable) $57.00
4.18004---- Solenoid, replacement $75.00

GROUP
4.21082---- Steering directional signal
4.21082---- Turn signal switch, 1941-47 Clipper, exchange or add $50 deposit $178.00 - See Note #1
4.21086---- Turn signal flasher $40.00
4.210925---- Turn signal lever knob, Ivory, reproduction INQUIRE

GROUP
4.2200---- Overdrive
4.2200---- Overdrive kick down switch, exchange or add $50 deposit. $104.00
4.2216---- Overdrive relay assembly. Delco, with 6 terminals INQUIRE
4.2223---- Overdrive lockout switch $80.00
4.2228---- Overdrive solenoid rebuilt R9, Exchange only $310.00 - See Note #1
4.2231---- Overdrive solenoid shaft seal $16.00

GROUP
4.2320---- Wiring harnesses

4.2320---- Wiring harnesses, Most models available INQUIRE

GROUP
Electrical accessories and Kits
Access---- Driving (clear )or Fog (amber) lights 6" 6 volt, pair,
with brackets, Packard crest, switch and wiring $245.00
Access---- Driving (clear )or Fog (amber) lights 6" 12 volt, pair,
with brackets, Packard crest, switch and wiring $232.00
Access---- Spotlight, left or right, 5" or 6" 6 volt, with Packard crest
and bracket, each $327.00
Access---- . Spotlight, left or right, 5" or 6" 12 volt, with Packard crest
and bracket, each $327.00
Access---- Parking light accessory, 1935-39, prime, mount on front fenders,
pair INQUIRE
4.999---- Tune-up kit: contains points, condenser, cap, rotor, 1935-36 120
Specify---- 10mm or 14m plugs, $129.00
4.999---- Tune-up kit: contains points, condenser, cap, rotor, 1937-47 120 with
10mm plugs $78.00
4.999---- Tune up kit: contains points, condenser, cap, rotor, 1937-47 6 cyl
with 10m plugs specify Autolite or Delco $65.00
4.999---- Backup light, 1935-40, with bumper bar mounting bracket,
with engraved PACKARD script INQUIRE
4.999---- Backup light, 1941-47, with engraved PACKARD script INQUIRE

Order Form
Top of Page
View Packard 110-120 Parts Index

Please inquire for any Engine parts not listed below
GROUP
5.0000 ---- Used engines, blocks INQUIRE - See Note #2
5.0100 ---- Camshaft

GROUP
5.0100 ---- Camshaft reconditioned, 6 cylinder, Exchange or add $300 deposit $235.00 - See Note #1
5.0100 ---- Camshaft reconditioned, 8 120, Exchange or add $300 deposit $245.00 - See Note #1
5.0101 ---- Camshaft bearing set, 1935-47 8 cylinder $85.00
5.0101 ---- Camshaft bearing set, 1937-47 6 cylinder $68.00
5.0105 ---- Timing chain INQUIRE
5.0111 ---- Camshaft sprocket 1935-36 120 $75.00
5.0111 ---- Camshaft sprocket 1937-47 75.00
5.0111 ---- Timing chain and gear set (3 pieces), 1935-47 120, 1937-47 Six $180.00
5.0200 ---- Connecting rod

GROUP
5.0200 ---- Connecting rod, Exchange or add $50 deposit $92.00 - See Note #1
5.0201 ---- Connecting rod bolt INQUIRE
5.201 ---- Connccting rod, nut and palwasher set 6 cyl $37; 8 CYL $50 5.0203 ---- Connecting rod bearing, original for 1935-38 Six and 120, Std., .001", .002" undersize, each $27.00
5.0203 ---- Connecting rod bearing, replacement for 1935-38 Six and 120,(connecting rod requires resizing)
standard, .001", .002", .010" to .060" undersize, each $23.00
5.0203 ---- Connecting rod bearing, 1939-47 Six and 120,
standard, .001",.002", .010" to .060" undersize, each $23.00
5.0204 ---- Connecting rod piston pin bushing, pair $8.50
5.0400 ---- Crankshaft

GROUP
5.0400 ---- Crankshaft New and used INQUIRE - See Note #2
5.0401 ---- Main bearing set, 6 cylinder, 4 mains, standard or .001",
.002", .010" to .040" undersize, $170.00
5.0401 ---- Main bearing set, 8 cylinder, 5 mains, standard or .001",
.002", .010" to .040" undersize $185.00
5.0408 ---- Crankshaft rear seal set (original style 2 wood sticks) $22.00
5.04105 ---- Crankshaft sprocket 1935-36 $53.00
5.04105 ---- Crankshaft sprocket 1937-47 $43.00
5.0500 ---- Cylinder Block and Head

GROUP
5.0500 ---- Freeze plug set (1938-39 advise plug diameter) $28.00
5.0503 ---- Cylinder head, Reconditioned, 1937-47 Six cylinder $465.00
5.0503 ---- Cylinder head, Reconditioned, 1935-47 120 (cast iron only) $725.00
5.0503 ---- Head stud, each $8.00
5.0503 ---- Head stud set, (23 studs,) 6 cylinder $120.00
5.0503 ---- Head stud set, (29 studs,) 120 $150.00
5.0503 ---- Head nut and washer, plain, replacement, pair $4.50
5.0503 ---- Head chrome acorn nut and washer, pair $10.50
5.0503 ---- Head chrome acorn nut and washer set, 6 cylinder, 23 pair $136.00
5.0503 ---- Head chrome acorn nut and washer set, 120, 29 pair $170.00
5.0504 ---- Head gasket, 6 cylinder $97.00
5.0504 ---- Head gasket, 8 cyl., New manufacture copper head gasket $97.00
5.0506 ---- Thermostat (Except: 120CD, 138CD and all 1938-39, see group 11.224) $14.00
5.0507 ---- Thermostat retainer, 1935-37 $28.00
5.0507 ---- Thermostat retainer, 1940-47 all INQUIRE
5.0508 ---- Thermostat housing INQUIRE
5.0509 ---- Thermostat housing gasket $4.00
5.0518 ---- Road breather tube $55.00
5.0531 ---- Water distribution tube, INQUIRE
5.0600 ---- Flywheel

GROUP
5.0600 ---- Flywheel good used, most models available $190.00
5.0602 ---- Flywheel ring gear $255.00
5.0604 ---- Flywheel housing lower cover, good used $145.00
5.0700 ---- Gaskets

GROUP
5.0700 ---- Engine overhaul gasket set, complete, includes every engine
gasket, fresh stock, 6 cylinder $180.00
5.0700 ---- Engine overhaul gasket set, complete, includes every engine
gasket, fresh stock 8 cylinder $199.00
5.0800 ---- Timing gear cover

GROUP
5.0800 ---- Timing gear cover good used (inquire for NOS) $64.00
5.0801 ---- Timing gear cover gasket and cork seal set $37.00
5.0803 ---- Timing gear cover front oil seal and retainer $43.00
5.0805 ---- Timing indicator good used $47.00
5.0900 ---- Manifold

GROUP
5.0900 ---- Exhaust manifold INQUIRE - See Note #2
5.0900 ---- Manifold to block stud and nut set $48.00
5.0902 ---- Manifold gasket set (includes: 3 manifold to block segments, carburetor and exhaust flange gasket) $48.00
5.0904 ---- Exhaust manifold heat control thermostat spring $38.00
5.0906 ---- Exhaust manifold heat riser parts INQUIRE
5.0920 ---- Intake manifold INQUIRE
5.0920 ---- Intake to exhaust manifold gasket (hot spot gasket) $16.00
(6.108) ---- Exhaust pipe flange gasket $9.00
5.1000 ---- Oil filler and filter

GROUP
5.1001 ---- Oil fill cap INQUIRE
5.1009 ---- Oil filter accessory, good used INQUIRE
5.1009 ---- Oil filter accessory unit, new (less steel connecting lines and bracket) $267.00
5.1009 ---- Oil Filter 1939 Six and 120 $87.00
5.10098 ---- Oil filter cartridge $26.00
5.1100 ---- Oil pan

GROUP
5.1100 ---- Oil pan good used $240.00
5.1101 ---- Oil pan gasket set $32.00
5.1102 ---- Oil dipstick $62.00
5.1200 ---- Oil pump

5.1200 ---- Oil pump, Exchange or add deposit of $100 $153.00 - See Note #1
5.12075 ---- Oil pump repair kit includes: 2 gears, gaskets and pressure relief spring $89.00
5.1300 ---- Oil strainer

GROUP
5.1300 ---- Oil strainer, 1935-38 INQUIRE
5.1300 ---- Oil strainer and float assembly, 1939-47 $104.00
5.1301 ---- Oil strainer and float mount, 1939-47 $158.00
5.1400 ---- Piston and Ring set

(check availability before boring the block)
GROUP
5.1400 ---- Piston with pin, standard, or .020", .030", .040", .060"
oversize 3-1/4" or 3-1/2"(see below note) 6 cyl set of 6 $288.00
5.1400 ---- Piston with pin, standard, or .020", .030", .040", .060"
oversize 3-1/4" or 3-1/2"(see below note) 9 cyl set of 8 $384.00
5.1401 ---- Piston pin, standard or oversize .003", .005", .010", each 10.00
Note: Please specify ring oversize, and width
5.14025 ---- Piston ring set for our pistons, 6 cylinder, standard, or .020", .030", .040", .060"
oversize $66.00
5.14025 ---- Piston ring setfor our pistons, 8 cylinder, standard, or
.020", .030", .040", .060" oversize $92.00
5.1550 ---- Stabilizer

GROUP
5.1504 ---- Snubber insulator, 1940-47 all, set of 4 $41.00
5.1504 ---- Snubber, link, adjuster INQUIRE
5.1550 ---- Engine-transmission stabilizer, 1935-39 6 & 120 $135.00
5.16005 ---- Motor mounts

GROUP
5.1603 ---- Motor mount, front 2 pieces, pair $48.00
5.1606 ---- Transmission mount, 1935-37, Exchange only, pair $297.00 - See Note #1
5.1609 ---- Transmission mount, 1938-47, each $94.00
5.1700 ---- Valves

GROUP
5.1700 ---- Valve, exhaust or intake 1935-40 $29.00
5.1700 ---- Valve, exhaust or intake 1941-47 $22.00
5.1701 ---- Valve cover good used $76.00
5.17015 ---- Valve cover gasket set $31.00
5.1706 ---- Valve spring $5.00
5.1707 ---- Valve key (lock), 1935-40, each $14.00
5.1707 ---- Valve key (lock), 1941-47, set (32 pieces) $24.00
5.1710 ---- Valve guide, intake or exhaust $9.00
5.1711 ---- Valve tappet 1935-37 120 and 115C each, $23.00 set of 16 $295.00
5.1711 ---- Valve tappet, 1938-39 reconditioned, exchange only, each $38.00
5.1711 ---- Valve tappet, 1940-47 reconditioned, exchange only, each $38.00
5.1711 ----- Valve tappet, 1940-47 new tappet less self locking adjusting screw, each $23.00 set of 16 $295.00
5.1800 ---- Vibration damper

GROUP
5.1800 ---- Vibration damper, rebuilt, Exchange only $430.00 - See Note #1
5.1900 ---- Water pump and fan

GROUP
5.1900 ---- Water pump, 1935-37, New Production $275.00 - See Note #1
5.1900 ---- Water pump, 1938-47, new $168.00
5.1912 ---- Water pump impeller 1938-47 $25.00
5.1915 ---- Water pump packing, 1935-37 all, each $11.00
5.1928 ---- Fan blade INQUIRE
5.1929 ---- Fan belt $49.00
5.1930 ---- Fan pulley, good used, (Inquire for new) $97.00
Access ---- Engine accessories

Access. ---- Head chrome acorn nut and washer set, 6 cylinder, 23 pair $136.00
Access. ---- Head chrome acorn nut and washer set, 8 cylinder, 29 pair $169.10
Access. ---- Engine enamel green, quart $39.00
5.999 ---- Engine decal set (oil filler cap, oil filter and air cleaner) $54.00

Engine Re-bore Kit

---- Engine Re-Bore kit for all 1938-47 6 cylinder. and 1935-47 8 cylinder. engines.

Includes:
---- oil pump kit
---- 6 or 8 pistons with pins and clips
---- freeze plug set
---- ring set
---- overhaul gasket set
---- valve springs
---- engine pre-lube
---- and a quart of engine enamel

Order Form
Top of Page
View Packard 110-120 Parts Index

When ordering, specify cylinder bore size. 6 cylinder kit, INQUIRE;
8 cylinder kit, $489.50 Plus shipping. (Check availability before boring the block)
Upgrade your Re-Bore kit

to include our Timing chain and gear set.
Add $192.50 (reg. $236.50)

---- Please inquire for any Exhaust parts not listed below
---- No C.O.D. orders for exhaust systems, prepaid orders only

GROUP
---- 6.000 Muffler $210.00
---- 6.001 Tail pipe, without resonator $158.00
---- 6.001 Tail pipe, with resonator, 1937 120CD & 138CD only $246.00
---- 6.003-8 Exhaust system hangers INQUIRE
---- 6.100 Exhaust pipe $114.00
---- 6.1025 Exhaust pipe hanger, most models available INQUIRE
---- 6.107 Exhaust pipe flange $50.00
---- 6.108 Exhaust pipe flange gasket $11.00
---- 6.200 Exhaust system, includes: muffler, 2 pipes, gasket. (Add $60 for
cars with resonators) $408.00
---- 6.200 Stainless steel exhaust system, includes: muffler, 2 pipes, gasket
---- (Add $150 for cars with resonator) $774.00
Access. ---- Exhaust deflector, stainless steel $38.00
Access. ---- Exhaust deflector, chrome plated reproduction of 50's style exhaust deflector $46.00

Order Form
Top of Page
View Packard 110-120 Parts Index

GROUP
7.000 ---- Front fender 1935-42 Except Clipper (See 30.770 for 1941-47
Clipper)
7.000 ---- Front fender, many new and used available INQUIRE - See Note #2
7.011 ---- Splash panels, 1935-40 INQUIRE
7.0075 ---- Front fender grille left, 1941 used (Note: price is based on fair
condition grilles, check price for better condition grilles)
See 11.3001 for 1940 models $214.00
7.021 Trim strip, front or rear fender, 1941-42 Except Clipper, (good used $27) each $51.00
7.121 ---- Fender welt, lacquered cloth over cotton bead, 3/16", per foot $2.75
7.200 ---- Running board rubber matting, 1935-37 115C , 120, pair $895.00
7.200 ---- Running board rubber matting, 1938-39 127" wheel base Replacement type with senior surface pattern $925.00
7.207 ---- Running board molding, stainless steel reproduction, 1935-40, Except
Clipper, 1601A,1701A,1801A pair $240.00
7.207 ---- Running board molding, stainless steel reproduction, 1938-40, 1601A,1701A,1801A pair $260.00
7.207 ---- Running board molding, new old stock, 1941 Except Clipper, each $150.00
7.207 ---- Running board molding, stainless steel reproduction, 1941, PAIR $213.00
7.207 ---- Running board molding clip set $36.00
7.999 ---- Fender skirt 1935-47, fiberglass reproduction of original Packard accessory, pair $425.00

Order Form
Top of Page
View Packard 110-120 Parts Index

9.100 Carburetor

GROUP
9.1001 ---- Carburetor, Stromberg 1bbl, rebuilt, 1940-41 6 cyl., Exchange or add
$150 deposit $299.00 - See Note #1
9.1001 ---- Carburetor, Carter 1bbl, rebuilt, 1937-39 aftermarket, 1942-47 6 cyl.,
Exchange or add $150 deposit $299.00 - See Note #1
9.1001 ---- Carburetor, Stromberg, 2bbl, rebuilt, 1935-40 120, Exchange only
$320.00 - See Note #1
9.1001 ---- Carburetor, Carter 2bbl, rebuilt, 1935-39 aftermarket, 1941-47
Exchange only $330.00 - See Note #1

Note: When returning carburetor core, prior to receiving rebuilt unit, remove brass fuel and vacuum line fittings. These hardware items are not included on rebuilt units. PACK CAREFULLY!. Double box the carburetor to insure adequate protection.
9.102 ---- Air cleaner assembly new replacement, 6 cylinder $95.00
9.102 ---- Air cleaner assembly, 120 INQUIRE
9.1131 ---- Starter switch on carburetor 1941-47 Clipper all models,
Good used $107), complete $190.00
9.1131 ---- Carburetor float 1941-47 Carter WA1 or WDO type $59.00
9.1135 ---- Carburetor repair kit, specify carburetor number, 1 barrel Stromberg
or Carter $62.00
9.1135 Carburetor repair kit, specify carburetor number, 2 barrel Stromberg
or Carter $62.00
9.1135 ---- Carburetor major rebuild kit, some kits available for Stromberg and
Carter INQUIRE
9.11355 ---- Carburetor control

Most linkage available, new and used INQUIRE
9.11355 (012) ---- Gas pedal kit, ribbed, 1935-40 (includes pedal, bracket and
hardware) $83.00
9.11355(012) ---- Gas pedal, ribbed, 1941-47 $69.00
Note: The linkage as follows applies to Clipper models only,
Inquire for 1935-41 Six and 120
9.11362 ---- Accelerator push rod to carburetor linkage $51.00
9.11364 ---- Rod to cross shaft linkage assembly $38.00
9.11366 ---- Accelerator pedal retracting spring $38.00
9.11367 ---- Gas pedal seal, 1941-47 Clipper (round fiber disk) $9.00
9.11371 ---- Accelerator relay lever $46.00
9.11372 ---- Accelerator shaft and bracket assembly $83.00
9.135 ---- Throttle operating rod linkage $53.00
9.1415 ---- Cross shaft linkage assembly, (mounts over cylinder head) $82.00
9.200 Fuel pump

GROUP
9.200 ---- Fuel pump, 1935 120, single action, Exchange only $130.00 - See Note #1
9.200 ---- Fuel pump, 1936 120 double action, Exchange only $160.00 - See Note #1
9.200 ---- Fuel pump, 1937-39 double action, $160 deposit $160.00 - See Note #1
9.200 ---- Fuel pump, 1940-47 single action, exchange only $129.00 - See Note #1

Note: When returning fuel pump core, prior to receiving rebuilt unit, remove brass fuel line fitting and the two mounting bolt spacers (sleeves). These hardware items are not included with rebuilt fuel pumps.
9.300 ---- Fuel tank

GROUP
Inquire for good used and New
9.300 ---- Fuel tank reconditioned, Exchange or add $500 deposit $812.00 - See Note #1 and #2
(4.0600) Gas tank sending unit rebuilt, Exchange only $234.00 - See Note #1
9.302 ---- Gas cap 1935-47 (replacement type for 1935-40) $28.00
9.3051 ---- Gas tank filler neck grommet, 1935-40 $54.00
9.306 ---- Gas tank strap, 1935-42, pair $82.00
9.406 ---- Fuel line hose, (flexible neoprene type hose, connects steel line to fuel
pump) $53.00
Access. ---- Fuel filter $43.00

Order Form
Top of Page
View Packard 110-120 Parts Index

(See 4.0200 for Clocks, 4.0600 for Dash Gauges)
Please inquire for any Instrument board parts not listed below
10.001 ---- Ash tray

10.001 ---- Ash tray, most years available, good used INQUIRE
10.001 ---- Ash ray lid, surround INQUIRE
10.021 ---- Glove box door

GROUP
10.029 ---- Glove box knob, 1935-39 INQUIRE
10.029 ---- Glove box lock cylinder and knob assembly, 1940 only (Inquire for other
years) $82.00
10.033 ---- Glove box lock cylinder, 1938-39 $60.00
10.0483 ---- Dash knob, 1941-47 Clipper, INQUIRE
10.066 ---- Gauges

GROUP
10.066 ---- Oil gauge, 1935-40 $169.00
10.0913-915 ---- Temperature gauge and tube rebuilding service,
1935-47 ---- (yours rebuilt) $234.00 - See Note #1
10.0915 ---- Temperature gauge and tube assembly, 1942-47 Clipper only New (brown)
Exchange or add $50.00 deposit $310.00 - See Note #1
NEW Dash knobs 1940, reproduction, INQUIRE
10.100 Speedometer

GROUP
10.100 ---- Speedometer, 1935-41 Except Clipper INQUIRE
10.100 ---- Speedometer, 1941-47 Clipper only, most models (good used $136.00) $289.00
10.127 ---- Speedometer cable and housing 1937-47 only. $146.00
10.127 ---- Speedometer cable shaft kit 1937-47 only $26.00
10.130 ---- Speedometer cable through dash rubber grommet, 1941-47 Clipper $26.00
For other instrument board gauges, see group 4

Order Form
Top of Page
View Packard 110-120 Parts Index

Please inquire for any Radiator parts not listed below
GROUP
11.001 ---- Radiator cap, 1935-39 $51.00
11.001 ---- Radiator cap, 1940 ALL and 1941-47 Clipper with “No Pressure type” only $38.00
11.001 ---- Radiator cap, 1941-47 all, 7lb pressure cap $44.00
11.003 ---- Radiator INQUIRE - See Note #2
11.0114 ---- Radiator cradle to frame grommet set of 4, 1941-47 all with locating boss $74.00
11.0114 ---- Radiator cradle to frame grommet set of 4, 1941-47 all without locating boss $58.00
11.012 ---- Radiator drain cock original brass type $32.00
11.0122 ---- Radiator hose set, 1935-40 $39.00
11.0122 ---- Radiator hose set, 1941-47 $64.00
11.0122 ---- Radiator hose clamp set, correct original style 1938-47 (replacement for 1935-37) $48.00
11.0122 ---- Radiator lower hose replacement (replaces the 2 rubber and 1 steel hose
1935-37) $41.00
11.013 ---- Radiator hose, 1938-47 lower metal, (check for availability) $96.00
Access ---- . Heater hose and clamp set $51.00
11.100 ---- Radiator Shell

GROUP
11.100 ---- Radiator shell, 1935-1940 INQUIRE
11.100 ---- Radiator lower splasher to grille pad 1935-37 all, 4 piece set $49.00
11.104 ---- Hood ornament, standard, 1936-40, good used $190.00, New $343.00
11.104 ---- Hood ornament, deluxe, 1936-42, (Except Clipper) Cormorant or Goddess,
reproduction INQUIRE
11.200 ---- Shutter

GROUP
11.202 ---- Shutter blade for models equipped with radiator shutter thermostat. INQUIRE
11.205 ---- Shutter rivet set (for movable shutter blades only) $45.00
11.223 ---- Shutter thermostat cover gasket 10.00
11.224 ---- Shutter thermostat 1937 120CD, 1938-39 all INQUIRE
11.300 ---- Grille

GROUP
11.300 ---- Radiator grille 1940-42, Except Clipper (1941-47 Clipper see 30.874)
good used from $234.00
11.3001 ---- Radiator grille, 1940, left or right, used (Note: price is based on fair
condition.
Grilles needing plating, check price for better condition grilles)
See 7.0075 for
1941 models $129.00
For 1941-47 Clipper front fender side grille, SEE 30.779
11.302 ---- Grille bar set, unplated, 18 piece set, 1940-42 110 and 120 $322.00

Order Form
Top of Page
View Packard 110-120 Parts Index

12.000 Carrier differential

GROUP
12.000 ---- Differential bearing, each $75.00
12.001 ---- Differential carrier assembly, with gears, good used, most models
available INQUIRE - See Note #2
12.0015 ---- Differential carrier, new and used less gears INQUIRE
12.003 ---- Differential housing gasket $22.00
12.005 ---- Ring and pinion set, 1937-42 Except 1940-42 Six and Clipper, 4.09 to 1 $572.00
12.005 ---- Ring and pinion set, 1940-41 Six, 1941-47 Clipper INQUIRE
12.0105 ---- Differential pinion bearing, front or rear $75.00
12.012 ---- Pinion seal $51.00
12.0161 ---- Universal joint flange, most models available (good used $55.00) $130.00
12.018 ---- Differential gears, and pinion gears each. $96.00
12.019 --- Pinion pin $38.00 12.020 ---- Differential pinion thrust washer $32.00
12.022 ---- Differential gear thrust washer, specify thickness $29.00
12.023 ---- Case and shaft assembly

GROUP
12.029 ---- Rear axle shaft, 1938-47 all Except Commercial chassis, (good used $202.00)
12.029 ---- Rear axle shaft, 1935-37, good used $245.00
12.029 --- Rear axle shaft, 1935-37 reconditioned with new bearing INQUIRE>br> 12.029 ---- Rear axle shaft, Commercial chassis only, good used $322.00
12.0295 ---- Rear axle shaft bearing, 1935-37 $195.00
12.0295 ---- Rear axle shaft bearing, 1938-39 Six, 1938-41 Eight $106.00
12.0295 ---- Rear axle shaft bearing, 1940-47 Six, 1942-47 Eight $92.00
12.0313 ---- Rear axle shaft seal kit, 1935-37, two sides (2 seals) $64.00
12.0313 ---- Rear axle shaft seal kit, 1938-47, two sides (includes 4
seals and mounting gaskets) $92.00
12.0315 ---- Rear axle shaft bearing seal, each $32.00
12.0317 ---- Rear axle seals and bearing kit, 1938-38 six and 38-41 Eight includes: pinion
seal, axle shaft bearings and seals) $332.00
12.0317 ---- Rear axle seals and bearing kit, 1940-41 six and 42-47 Six and Eight includes: pinion
seal, axle shaft bearings and seals) $309.00
Please inquire for any Rear axle parts not listed below

Order Form
Top of Page
View Packard 110-120 Parts Index

GROUP
13.000 ---- Shock absorber, front, Except: 1800-1-3-6, Exchange only $225.00 - See Note #1
13.000 ---- Shock absorber, front for models 1800-1-3-6, Exchange only $245.00 - See Note #1
13.001 ---- Shock absorber, rear, 1935-39, Exchange only $195.00 - See Note #1
13.001 ---- Shock absorber hydraulic fluid, 11oz $12.00
13.001 ---- Shock absorber, rear, 1940-47, Gas charged each $59.00
13.1001 ---- Stabilizer bar assembly INQUIRE
13.114 ---- Stabilizer bar mounting bushing $14.00
13.1164 ---- Stabilizer (rear) hydraulic, 1941-47 Clipper INQUIRE

Order Form
Top of Page
View Packard 110-120 Parts Index

SPRINGS--- Group 14---

Please inquire for any Spring parts not listed below
GROUP
14.000 ---- Front coil springs, pair (advise if car is equipped with sidemount tires)
$325.00
14.002 ---- Front spring compression (lower) rubber bumper, 1935-47, Except Commercial
and long wheelbase, pair $90.00
14.002 ---- Front spring compression (lower) rubber bumper, all Commercial and long wheel
base models, pair $124.00
14.006 ---- Compression bumper clip, 1940-47, each $12.00
14.008 ---- Coil spring insulator pad, 1935-37, set $58.00
14.009 ---- Rebound (upper) rubber bumper, pair $88.00
14.100 ---- Rear leaf spring, pair, reproduction $740.00
14.105 ---- Rear leaf spring front bushing, 1935-36 120, pair $98.00
14.105 ---- Rear leaf spring front bushing, 1937, pair $139.00
14.105 ---- Rear leaf spring bushing kit, 1938-39, (6 bushing set) $72.00
14.105 ---- Rear leaf spring bushing kit, 1940-47, (12 bushing set) $72.00
14.110 ---- Rear leaf spring separator rubber spacers 24 per car, 1938-47 each $4.00
14.114 ---- Rear leaf spring bumper, 1938-40, pair $85.00
14.114 ---- Rear leaf spring bumper, 1941-47, pair $100.00
14.1170 ---- Shackle kit, includes: shackles and bushings (both sides) 1938-47, most models available $195.00

Order Form
Top of Page
View Packard 110-120 Parts Index

---- Please inquire for any Steering & Suspension parts not listed below
15.000 ---- Steering connecting rod

GROUP
15.000 ---- Connecting rod (draglink) new and used INQUIRE
15.0071 ---- Idler arm (with rubber and metal bushing) 1941-47 Clipper $275.00
15.0074 ---- Idler arm bushing, 1941-47 Clipper $39.00
15.00746 ---- Idler arm frame bracket and bushing, 1941-47 Clipper, with threaded metal
bushing $66.00
15.100 ---- Steering crank (Center steering Idler Arm 1935-41 Except Clipper)

Note: 1939 Models, check if your center steering arm uses the 2 bearings or 1 bushing
GROUP
15.100 ---- Center steering arm, 1935-39, takes two bearings $235.00
15.100 ---- Center steering arm, 1939-42, Except Clipper, good used (Inquire for new),
single bushing type $285.00
15.102 ---- Center steering arm bearing kit, 1935-39 (heavy-duty ball
bearing replacement) $89.00
15.103 ---- Center steering arm pin, 1935-39 (order type Straight or Taper $93.00
15.103 ---- Center steering arm pin nut, 1935-39 for cars with round head pin $14.00
15.105 ---- Center steering arm pin, 1939-42 Except Clipper, Hex head type $58.00
15.105 ---- Center steering arm pin spring washer, 1939-42 Except Clipper $19.00
15.105 ---- Center steering arm pin nut, 1939-42 Except Clipper for cars with hex head pin $20.00
15.106 ---- Center steering arm bushing 1939-42 Except Clipper $59.00
15.200 ---- Steering cross tube

GROUP
15.2005 ---- Tie rod assembly, inner, 1941-47 Clipper $215.00
15.202 ---- Tie rod end, inner, 1935-42 Except Clipper, each.. Specify left or right
hand thread $32.00
15.202 ---- Tie rod end, outer, all, each. Specify left or right hand thread $32.00
15.2025 ---- Adjusting sleeve, 1935-41, good used, Except Clipper $118.00
15.2025 ---- Adjusting sleeve, 1941-47 Clipper $26.00
15.310 ---- Steering gear assembly

GROUP
15.302 ---- Steering column grommet at toe board, 1935-38 $26.00
15.3076 ---- Steering column to instrument board collar grommet, 1941-42 Except
Clipper $70.00
15.310 ---- Steering gear box assembly, good used. INQUIRE
15.310 ---- Steering gear box rebuilding service (call for details) $655.00 to $725.00
15.318 ---- Steering gear box cross shaft 1941-47 Clipper $245.00
15.320 ---- Cross shaft bushings, pair $58.00
15.321 ---- Pitman arm, 1935-42 Except Clipper, good used $195.00
15.321 ---- Pitman arm, 1941-47 Clipper $215.00
15.3222 ---- Pitman arm rubber bushings, 1941-42 Except Clipper, pair $32.00
15.3225 ---- Steering gear box (cross shaft) lower oil seal $28.00
15.329 ---- Shaft and worm assembly 1942-47 Clipper, check availability $355.00
15.3295 ---- Steering gear box upper bearing $52.00
15.3305 ---- Steering gear box upper oil seal $24.00
15.3315 ---- (3317)Steering gear box worm bearing lower race (2 required per steering
box) each $49.00
15.3316 ---- Steering gear box worm bearing cone (2 required per steering box) each $49.00
15.3316 ---- Steering gear box worm bearing and seal kit (2 races, 2 cones and 2
seals) $195.00
15.333 ---- Steering wheels, used, 1935-42 Except Clipper INQUIRE
15.333 ---- Steering wheels, used, 1941-47 Clipper $235.00
15.400 ---- Steering knuckle

GROUP
15.400 ---- Steering knuckle used, 1935-42 most models Except Clipper (1941 Clipper,
Inquire) $228.00
15.400 ---- Steering knuckle, 1942-47 Clipper (used, $148.00) (1941 Clipper,
Inquire) $235.00
15.401 ---- Steering knuckle bearing adjusting nut, each $24.00
15.402 ---- Steering knuckle bearing adjusting nut washer, each $20.00
15.404 ---- Front wheel bearing, inner or outer $67.00
15.404 ---- Front wheel bearing and seal kit, Except Commercial series (2 seals and 4
bearings) $175.00
15.404 ---- Front wheel bearing and seal kit, Commercial series (2 seals and 4
bearings) $225.00
15.408 ---- King pin kit, 2 sides 1935-40, Except commercial series $135.00
15.408 ---- King pin kit, 2 sides 1941-47, Except commercial series $125.00
15.408 ---- King pin kit, 2 sides, Commercial series (Hearse and Ambulance) $285.00
15.501 ---- Steering knuckle support

GROUP
15.501 ---- Steering knuckle support, 1935-42 Except Clipper INQUIRE
15.501 ---- Steering knuckle support, 1942-47 Clipper (used $89.00)
Except Commercial series (1941 Clipper, Inquire) $190.00
15.502(514) ---- Lower control arm, (used $144.00) 1941-47 Clipper 220.00
15.5035 ---- Lower inner bushings, 1941-47 Clipper, 2 sides $85.00
15.5035 ---- Lower inner shaft and threaded bushing assembly, 1941-47 Clipper, 1 side $95.00
15.505 ---- Lower inner bushing and pin assembly, 1935-39, pair $160.00
15.50515 ---- Lower outer pin and bushing kit (2 sides) 1935-42 Except Clipper $135.00
15.506 ---- Lower inner bushings, 1940-42 Except Clipper, set of 4 $46.00
15.510 ---- Upper outer bushing, 1935-38, original style, pair $150.00

15.510 ---- Upper outer bushing set, 1935-38, sleeve and rubber bushing replacement $78.00
15.510 ---- Upper outer bushing set, 1939-42 Except Clipper $62.00
15.511 ---- Upper outer pilot & washer, (camber adjuster), 1935-42 Except Clipper, specify offset $49.00
15.5131 ---- Lower outer pin kit, 1941-47 Clipper 1 side $58.00
15.5131 ---- Upper outer pin kit, 1941-47 Clipper 1 side $72.00
15.515 ---- Torque arm assembly, 1935-42 Except Clipper used $175.00
15.516-7 ---- Torque arm ball, 1935-39, pair $80.00
15.516-7 ---- Torque arm bushing, 1940-42, except Clipper, set of 4 bushings $50.00
15.518 ---- Torque arm shim (caster adjuster), 1935-42 Except Clipper, specify 1/2 degree or 1 degree $43.00

Front end kits 1935-47 include: 2 outer tie rod ends, king pin kit, lower inner bushings, upper and lower outer pin kits, torque arm ball, or bushings as required.
Front End Kits

Kits
15.999 ---- Front end kit, Standard, 1935-39 Six and 120, Except 1939-41 Ambulance and bus $420.00
15.999 ---- Front end kit, Standard, 1939-41 Ambulance and Bus $570.00
15.999 ---- Front end kit, Standard, 1940-47 all Except Commercial chassis $430.00
15.999 ---- Front end kit, Deluxe, 1941-47 Clipper with lower inner shafts $511.00

Order Form
Top of Page
View Packard 110-120 Parts Index

Please inquire for any Trunk Rack parts not listed below
17.000 ---- Trunk rack INQUIRE - See Note #2
17.000 ---- Trunk, Original Packard Accessory, price based on condition
from $255.00 to $495.00 - See Note #2
17.004 ---- Trunk rack clamp screw (winged knob) INQUIRE
17.010 ---- Trunk rack acorn nut set of 4 $42.00

Order Form
Top of Page
View Packard 110-120 Parts Index

Please inquire for any Universal joint parts not listed below
GROUP
18.013 ---- Drive shaft, new and used INQUIRE
18.0152 ---- Universal joint 1935-37, 1939-40 120, Eight with 4 winged bearings $65.00
18.0152 ----- Universal joint 1938 120, 1941-42 six (except Clipper) rear $150.00 18.0152 ---- Universal joint 1937-47 with 2 round and 2 winged bearings,
or 4 round bearings (Except 1941-42 Six front) $65.00
18.0152 ---- Universal joint front, 1941 Six with Detroit ball type with housing,
complete $163.00
18.0152 ---- Universal joint repair kit, for 1941 Six with Detroit ball type, internal
parts, less housing $86.00
18.0154 ---- Universal joint front boot, for 1941 Six with Detroit ball type $39.00

Order Form
Top of Page
View Packard 110-120 Parts Index

WHEELS --- Group 19 ---

Please inquire for any wheel parts not listed below
GROUP
19.000 ---- Wheel 16", 1935-40 good used INQUIRE
19.000 ---- Wheel 15", 1940-47 good used $187.00
19.000 ---- Wheel bolt $6.00
19.001 ---- Wheel, front, grease cap, used $38.00
19.001 ---- Wheel, front, grease cap, new (check for availability) $47.00
19.0015 ---- Front wheel grease seal, Except 1939-41 Commercial chassis $27.00
19.0015 ---- Front wheel grease seal 1939-41 Commercial chassis $42.00
19.002 ---- Hub cap 1935-36, used, fair to good condition From $25.00 to $100.00
19.002 ---- Hub cap 1937 120 #316184production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1938 120 #326768production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1939 120 #333119production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1940 120 "Script" #348386production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1940 120 #356176 "PACKARD 120"production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1941 120 and Clipper #373597production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1937-38 Six #316183production exactly as original $85.00 4 for $330
19.002 ---- Hub cap 1939 Six #333118production exactly as original $85.00 4 for $330
19.002 ---- Hub cap small, 1941-47, used $82.00
19.002 ---- Hub cap large, 1941-47, used $122.00

Note Some of the above hubcaps represent a selection of good used, we also offer hubcaps requiring more work to restore and some new old stock, inquire for pricing.

19.003 ---- Hub cap clip $19.00
19.003 ---- Hub cap clip rivet, set of 5 $9.00
19.1015 ---- Side mount upper to cowl brace grommet, 1936-37, pair $18.00
19.104 ---- Side mount brace to fender grommet, 1936-37, pair $36.00
Access ---- Side mount mirror, notched or flat bottom base, pair, (Head engraved
“PACKARD”) $210.00
Access ---- Trim ring, 15" or 16", reproduction stainless steel $33.00

Order Form
Top of Page
View Packard 110-120 Parts Index

Please inquire for Body parts not listed below
GROUP
30.007 ---- Ash tray, assemblies, parts new & used INQUIRE
30.007 ---- Ash tray handle, 1940-47, reproduction $22.00
30.022 ---- Rear view interior mirror, 1935-39 INQUIRE
30.022 ---- Rear view interior mirror 1940-47 reproduction (replacement for 1940-42 Except Clipper) $129.00
30.045 ---- Body belt molding

We have available new old stock belt molding for most 1941-47 Clippers. INQUIRE
30.100 ---- Body hold down

GROUP
30.1004 ---- Body hold down cushion, high density, special fabric replacement, 2 foot
strip, enough to do the complete car (you must cut into sections
and drill mounting hole) $18.00
Cowl

GROUP
30.201 ---- Hood lacing kit with rivets $45.00

Note: Front and rear door parts are listed together. Group reference numbers are FRONT and REAR respectively

30.295-435 ---- Doors, front and rear

GROUP
30.295 ---- Door 1935-47 INQUIRE - See Note #2
30.3005 ---- Door arm rest, 1941-47 Clipper, used $94.00
30.319-446 ---- Door hinge

30.310 ---- Door hinge upper, lower; 1941-47 Clipper (check availability) $179.00
30.319-34 ---- Door lock assembly. and parts

GROUP
30.319 ---- Door latch assembly, 1935-41 Except Clipper INQUIRE
30.319 ---- Door latch assembly, 1941-47 Clipper, Except left front $112.00
30.319 ---- Door latch assembly, 1941-47 Clipper, left front $165.00
30.3195 ---- Door lock cylinder, any lock $36.00
30.3195 ---- Door lock cylinder parts available INQUIRE
30.3227 ---- Door lock cylinder key, blank $6.00
30.326 ---- Door handle, exterior, 1935-42 Except Clipper INQUIRE
30.326 ---- Door handle, exterior, 1941-47 Clipper (good used $95.00) $185.00
30.328 ---- Door handle gasket, 1936-47, pair $26.00
30.332 ---- Door handle, interior, 1935-42 INQUIRE
30.332 ---- Door handle, interior, 1941-47 Clipper $68.00
30.334 ---- Door handle, vent and window escutcheon, 1940-47, advise colors, each $18.00
30.341 ---- Door latch striker, dovetail, 1935-42 Except Clipper INQUIRE
30.341 ---- Door latch striker assembly, 1941-47 Clipper (Except left front) $94.00
30.3439 ---- Door trim panel clip, set of 20 $20.00
30.3444 ---- Door Weatherstrip

30.344 ---- Door weatherstrip, replacement, per foot (50 foot roll, $88.00) $2.75
30.344 ---- Door weatherstrip, reproduction of original, 1937, 14 foot strip, 1
door (see figure 1, #1) $84.00
30.344 ---- Door weatherstrip, reproduction of original, 1937, per foot (see
figure 1, #2) $4.75
30.344 ---- Door weatherstrip, reproduction of original, 1938-39, 12-½ foot
strip, 1 door (see figure 1, #3) $79.00
30.344 ---- Door weatherstrip, reproduction of original, 1938-39, 12 foot strip,
1 door (see figure 1, #4) $78.00
30.344 ---- Door weatherstrip, reproduction of original, 1940-42, per foot
(see figure 1, #5) $4.75
30.344 ---- Door weatherstrip, reproduction of original, 1941-47, per foot
(see figure 1, #6) $4.00
30.344 ---- Door weatherstrip clip for weatherstrip in figures #1, #3 and #4,
each $1.75
30.344 ---- Front door hinge pillar weatherstrip, 1941-47, pair $159.00
---- KIT Door weatherstrip kits see Page 23 for our complete weatherstrip
kit information

Note: Each kit contains: hinge pillar weatherstrips and
weatherstrip for the door perimeter

Kit Front door weatherstrip kit, 1941-47 Clipper $245.00
30.35125- 30.4761 ---- Door window

GROUP
30.352 ---- Window dust seal 1935-41 Except Clipper, pair $28.00
30.352 ---- Window dust seal 1941-47 Clipper, pair $44.00
30.366 ---- Window glass, 1938-47 sedan, most models $135.00
30.366 ---- Window glass, 1938-47 2 door, most models $165.00
30.386 ---- Window regulator 1935-41 Except Clipper $144.00
30.386 ---- Window regulator 1941-47 Clipper $110.00
30.388 ---- Window handle, interior, 1941-47 Clipper (1935-41 except Clipper INQUIRE) (good used $65.00) $95.00
30.388 ---- Window crank knobs, reproduction, 1938-40, each $20.00
30.388 ---- Window crank knobs, reproduction, 1941-47, each $26.00
30.3963 ---- Window runway channel, flexible, sedans only, 1 per window, each $40.00
30.3963 ---- Window vertical runway channel, rigid, specify front or rear, pair $55.00
30.401-550 ---- Door window wing (vent window)

GROUP
30.404 ---- Window wing glass, 1938-47 Clipper $73.00
30.408 ---- Window wing assembly, chrome frame INQUIRE
30.410 ---- Window wing handle, 1941-47 Clipper $57.00
30.419 ---- Vent window replacement handle with, 1938-39 (must replace knob) each $35.00
30.433 ---- Vent window weatherstrip, Front, 1935-40 EXCEPT Convertible, pair $140.00
30.433 ---- Vent window weatherstrip, Front, 1941-47, pair $147.00
30.433 ---- Vent window weatherstrip, Front, 1936-42 convertible, pair $148.00
30.4335 ---- Vent window vertical weatherstrip 1935-41 Except Clipper, (1
strip seal 2 vent windows) $14.00
30.560 ---- Vent window vertical weatherstrip 1941-47 Clipper, front, pair $37.00
30.5605 ---- Vent window weatherstrip rear, 1941-47 Clipper, pair $165.00
30.580 ---- Electrical Courtesy and License light

GROUP
30.61125 ---- Courtesy, dome lights & parts INQUIRE
30.634 ---- License light assembly, bracket, parts INQUIRE
30.635 ---- License light to body mounting gasket, (for 1938-40 with “PACKARD” lens) $58.00
30.635 ---- License light to body mounting gasket, 1941-42 Except Clipper, with license
light in trunk handle $20.00
30.6355 ---- License light to bumper mounting gasket, 1941-47 Clipper $30.00
30.650 ---- License light lens, 1938-40, New plastic reproduction with center license
lamp (1935-37 see 4.1634) $72.00
30.650 ---- License light lens, 1940-42 Except Clipper, half round type glass $45.00
30.650 ---- License light lens, 1941-47 Clipper, rectangular New plastic reproduction $59.00
30.700 ---- Windshield wiper 1940-47 with electric wiper system (see 31.370 for 1935-39 vacuum system)

GROUP
30.7085 ---- Wiper blade $49.00
30.709 ---- Wiper arm, specify left or right and wiper blade length $110.00
30.765 ----- Electric wiper system motor, linkage, parts etc. INQUIRE
30.770 ---- Front fender 1941-47 Clipper

GROUP
30.770 ---- Front fender new and good used - See Note #2 INQUIRE
30.779 ---- Front fender side grille, good used, left or right $245.00
30.780 ---- Front fender grille extension side moldings INQUIRE
30.790 ---- Rear fender 1941-47 Clipper

GROUP
30.791 ---- Gas filler door $89.00
30.7912 ---- Gas filler door bumper set $9.00
30.7918 ---- Gas filler door spring, each $23.00
30.8005 ---- Floor

GROUP
30.8005 ---- Floor pan repair panel, rear left or right, 1938-42 except Clipper, each $120.00
30.8005 ---- Floor pan repair panel, rear left or right, 1941-47 Clipper, each $10.00
30.806 ---- Door sill plate sets, 1935-42 , 2 door, most models available,aluminum special order $435.00
30.806 ---- Door sill plate sets, 1935-42 , 4 door, most models available,aluminum special order $465.00
30.8007 ---- Floor pan repair panel, front left or right, 1938-42 except Clipper, each $200.00
30.8007 ---- Floor pan repair panel, front left or right, 1941-47 Clipper, each $110.00
30.8105 ---- Door sill rubber step plate set, 1942-47 2 door $412.50, 1941-47 4 door INQUIRE
30.8135 ---- Floor side sill molding, 1941-47 Clipper reproduction, pair $425.00
30.814 ---- Rocker outer repair panel, 1942-47 Clipper left or right, each $55.00
30.833 ---- Rubber push-in fastener for firewall insulation facing, each $2.25
30.874 ---- Radiator grille and splashers

GROUP
30.874 ---- Grille, 1941-47 Clipper, used (price determined by condition) $255.00-$535.00
30.8749 ---- Splashers INQUIRE
30.8989 ---- Front seat

GROUP
30.927 ---- Seat handle 1941-47 Clipper, Note: Has “round” mounting area $58.00
30.927 ---- Seat handle 1941-47 Clipper, Note: Has “rectangular” mounting area INQUIRE
30.930 ---- Seat track, 1941-47 Clipper, check availability $75.00
31.000 ---- Top folding

GROUP
31.01514 ---- Tacking strip 10' section, front 3/16" X 5/8", or rear 5/16" X 1/2" $24.00
31.0749 ---- Side rail weatherstrip (see figure 2, #1) per foot $5.00
31.0749 ---- Side rail weatherstrip (see figure 2, #2) per 12 foot strip $114.00
31.0749 ---- Side rail weatherstrip (see figure 2, #3) per 12 foot strip $105.00
Note: The following convertible tops are for 2 door models only
Trim Vinyl convertible top, Supertex™, White/Black, Black/Black or Tan/Black INQUIRE
Trim Vinyl convertible top, Ultratex™, White/Black or Black/Black INQUIRE
Trim Canvas convertible top, Colortex™, Tan/Tan, Black/Black or Blue/Tan INQUIRE
Trim Polished stainless steel framed rear glass window, 7" X 2-1/2" INQUIRE
31.1502 ---- Trunk (see Group 17 for Trunks and Trunk Rack)

GROUP
31.1500 ---- Trunk pan lower section repair panel 1938-42 $200.00
31.157 ---- Trunk lid, 1935-42 Except Clipper INQUIRE - See Note #2
31.157 ---- Trunk lid assembly 1941-47 Clipper, most models available, (used $189.00)
$388.00 - See Note #2
31.164 ---- Hinge assembly, 1935-42 Except Clipper INQUIRE
31.164 ---- Hinge assembly, 1941-47 Clipper (good used $185.00) new INQUIRE
31.167 ---- Latch lock assembly, 1941-47 Clipper (1935-42 Except Clipper Inquire) $95.00
31.1672 ---- Lock cylinder $45.00
31.1679 ---- Lock cylinder key blank $7.00
31.169 ---- Lock case, dust cover, shaft, etc. INQUIRE
31.173 ---- Trunk handle, 1935-42 Except Clipper INQUIRE
31.1735 ---- Trunk handle, 1941-47 Clipper $98.00
31.187 ---- Lock striker, 1941-47 Clipper $66.00
31.190 ---- Weatherstrip, replacement, per foot $2.75
31.190 ---- Weatherstrip, reproduction, (see figure 3, #1) per foot $4.80
31.190 ---- Weatherstrip, reproduction, (see figure 3, #2) per foot $5.00
31.190 ---- Weatherstrip, reproduction, (see figure 3, #3) per foot $4.80
31.190 ---- Weatherstrip, reproduction, (see figure 3, #4) 14 ½ foot strip $79.00
31.190 ---- Weatherstrip, reproduction, 1941-47 Clipper $64.00
31.225 ---- Ventilator (cowl vent)

GROUP
31.225 ---- Cowl vent INQUIRE
31.2286-2373 ---- Cowl vent parts INQUIRE
31.239 ---- Cowl vent gasket, all $42.00
31.2745 ---- Rear quarter window

GROUP
31.287 ---- Rear quarter window glass, 1935-47, most models available $85.00
31.280 ---- Rear quarter window horizontal dust seal set, (4 strips) $46.00
31.345 ---- Quarter window weatherstrip, 1935-37 sedans, pair $161.00
31.345 ---- Quarter window weatherstrip, 1938-40 Except 1940 5 passenger touring sedan, pair $161.00
31.345 ---- Quarter window weatherstrip, 1940 5 passenger touring sedan, pair $175.00
31.345 ---- Quarter window weatherstrip, 1941 all Except Clipper $161.00
31.353 ---- Rear window

GROUP
31.353 ---- Window rear glass, 1935-41 Except Clipper, per side $100.00
31.353 ---- Window rear glass, 1941-47 Clipper 4 door sedan, good used $184.00 - See Note #2
31.358 ---- Window rear weatherstrip, 1935-37 $108.00
31.358 ---- Window rear weatherstrip, without reveal molding, 1938-1940 all (Except convertible) $139.00
31.358 ---- Window rear weatherstrip, with reveal molding, 1940 (Except convertible)$134.00
31.358 ---- Window rear weatherstrip, 1941 all, Except Clipper, with reveal molding $139.00
31.358 ---- Window rear weatherstrip, 1941 all, Except Clipper, without reveal molding $108.00
31.358 ---- Window rear weatherstrip, 1941-47 Clipper $144.00
31.366 ---- Stainless and chrome trim INQUIRE
31.370 ---- Windshield wiper (cleaner) 1935-39 Vacuum system (see 30.700 for 40-47 electric system)

GROUP
31.374 ---- Wiper driver assembly. INQUIRE
31.379 ---- Wiper vacuum motor, your motor rebuilt (inquire for exchange availability)$179.00
Note: 1935-36 120 original equipment uses an arm and blade that incorporates a guide.
We cannot replace the original. You may use the 1937-39 style to replace original

31.3862 ---- Wiper blade 1937-39 $19.00
31.387 ---- Wiper arm 1937-39 $41.00
31.387 ---- Wiper arm chrome acorn nut each $12.00
31.3905 ---- Windshield

GROUP
31.3905 ---- Windshield 1935-37 most models available, per side $175.00
31.3905 ---- Windshield 1938-47 most models available, per side $145.00
31.397 ---- Windshield trim INQUIRE
31.406 ---- Weatherstrip Except convertible, 12 foot length $60.00
31.406 ---- Weatherstrip, 1937, Except convertible $102.00
31.406 ---- Weatherstrip, 1938-42 (Except Clipper) advise with or without reveal moulding $155.00
31.406 ---- Weatherstrip, 1941-47 Clipper, all $155.00
31.413 ---- Trim

GROUP
31.417 ---- Carpet set, front and rear, 1938-47, inquire for samples, see Kanter catalog for information $189.00
31.458 ---- Head liner, inquire for samples (Limousine and 7 passenger $239.00) see Kanter catalog for information $195.00
31.474 ---- Seat upholstery kit, front and rear, inquire for samples, see Kanter catalog for information $329.00
31.474 ---- Seat upholstery deluxe kit pleated, front and rear, inquire for samples, see Kanter catalog for information $419.00
31.474 ---- Seat upholstery deluxe pleated mohair front and rear, inquire for samples $330.00
31.474 ---- Upholstery material, per yard, inquire for samples $25.00

Order Form
Top of Page
View Packard 110-120 Parts Index

33.000 ACCESSORIES

View Packard 110-120 Parts Index
GROUP
Exhaust pipe deflector $32.00
Exhaust pipe devlector, reproduction of Packard exhaust deflector $39.00
Fender skirts, pair, 1935-47 $355.00
Firewall patent plate, 1935-47 INQUIRE
Floor mats, reproduction of rare original accessory, 17"x21" $26.00, Set of 4 $97.00
Heater assembly, blower motor and parts INQUIRE
Defroster and foot warmer, dash mount, 1942-47 New Old Stock $95.00
Heater, underseat unit, 1942-47 New Old Stock$INQUIRE
Light Fog light (amber) or Driving light (clear) with brackets and Packard crests,
5" or 6" 6 volt, pair $208.00
Light Fog light (amber) or Driving light (clear) with brackets and Packard crests,
5" or 6" 12 volt, pair $197.00
Light Spot light, left or right, 5" or 6", 6 volt, each, with crest and
bracket $285.00
Light Spot light, left or right, 5" or 6", 12 volt, each, with crest and
bracket $274.00
License plate frame, reproduction of original, chrome plated & adjustable (2 for $55.00) each $29.00
Mirror, sidemount, 1935-41, Except Clipper, specify if sidemount cover has center
stainless molding, pair $195.00
Note: the notched bottom mirror post accommodates 5/8" width molding. If your trim is wider please inquire.
Mirror exterior, 1941-47 Clipper series only, pair $355.00
Oil filter assembly, uses replacement type filter, less lines $195.00
Radio some models available, used as-is, 1935-42 Except Clipper INQUIRE
Radio all models available, used as-is 1941-47 Clipper $325.00
Radio checked good working condition, 1941-47 Clipper $625.00
Wheel trim ring, stainless steel reproduction, 15" or 16" ach $33.00

Order Form
Top of Page
View Packard 110-120 Parts Index